How to Apply Your Custom Stickers Like a Pro (Step-by-Step Guide)

So, you’ve got your custom Ace Stickers, awesome choice! Whether you're personalizing your bike, helmet, skis, or motorcycle gear, applying your stickers correctly is key to making them look great and last long. In this guide, we’ll show you exactly how to apply them like a pro, in just a few simple steps.

What You’ll Need:

1. A clean, dry surface

2. Soft cloth or paper towel

3. Optional: squeegee or credit card (to smooth out bubbles)

4. Your custom Ace Stickers (of course!)

Step-by-Step Guide

Step 1: Clean the Surface

Before applying your sticker, make sure the surface is clean and dry. Use a bit of mild soap and water, then wipe with a dry cloth.
Pro Tip: Avoid alcohol-based cleaners, they can damage some surfaces.

Step 2: Peel Carefully

Peel the backing from your sticker slowly, making sure not to touch the adhesive side too much.

Not sure how? Watch our quick how-to video here for a step-by-step demo!

Step 3: Apply with Precision

Place the sticker on your desired surface. Start from one edge and press down slowly to avoid bubbles. Use a squeegee or credit card to firmly press the sticker into place.

Step 4: Smooth It Out

Run the squeegee or card over the entire sticker, pushing out any air bubbles. Start from the center and move outward in all directions.

Step 5: Let It Set

Avoid washing or exposing your sticker to heavy moisture for at least 24 hours to ensure the adhesive fully sets.

Care Tips

1. Avoid power washing directly over stickers

2. To clean, just wipe gently with a damp cloth

3. Our stickers are weatherproof and made to last, but a little care goes a long way!

 

Now your gear is not only personalized, it looks pro! Show it off!
Don’t forget to tag us on Instagram @acesticker for a chance to be featured.